CME KIT

The Calibration Made Easy KIT (CME KIT) components are listed below:

• PROCESS MODULE, IS A PORTABLE PROCESSING UNIT WHICH WILL ALLOW THE CME SOFTWARE TO COMMUNICATE WITH YOUR INSTRUMENT AND THE MODEL MMB / MODEL TEB TEST DEVICES.

• THE MODEL MMB, IS A PORTABLE BATTERY OPERATED TEST AND MEASURE INSTRUMENTATION DEVICE THAT INCLUDES AN RS-232 COMMUNICATION PORT, SINE/SQUARE WAVE GENERATOR, A VARIABLE OUTPUT CONTROL, HUMIDITY GAUGE THERMOMETER, (2) BNC CONNECTORS, (1) 2-PIN CONNECTOR, (1) 3-PIN CONNECTOR, (1) 4-PIN CONNECTOR AND TRUE RMS DIGITAL MULTIMETER , TO CALIBRATE MACHINE CONDITION MONITORING VIBRATION INSTRUMENTATION.

• THE MODEL TEB, IS A PORTABLE MOTOR TEST INSTRUMENTATION ASSEMBLY WITH A BUILT IN AC/DC 5000 RPM MOTOR THAT RUNS ON 115 VOLTAGE AC. IT INCLUDES AC/DC SPEED CONTROL SWITCH, (3) BNC CONNECTORS, (1) 2-PIN CONNECTOR, (1) 3-PIN CONNECTOR AND (1) 4-PIN CONNECTOR, TO CHECK MACHINE CONDITION MONITORING VIBRATION INSTRUMENT TRANSDUCERS.

CME KIT Components Top

• A. PROCESS MODULE (1)

• B. MODEL MMB (1)

• C. MODEL TEB (1)

• D. CME SOFTWARE CD (1)

• E. DVM CABLE (DIGITAL VOLT METER) (1)

• F. RS-232 CABLE (1)

• G. TRANSDUCER CABLE (1)

• H. SET OF SPARE BATTERIES( 1)

• I. CARRYING CASE (1)

• J. CME KIT OPERATION MANUAL (1)

Wave Generators:	Range:	20 HZ to 150K HZ variable output control
	Accuracy:	20 HZ to 100K HZ - +/- 2% or less
		100K HZ to 150K HZ - +/- 3% or less

Temperature:	Range:	0 C to 50 C degrees
	Accuracy:	0 C to 40 C – (1 C) degrees
		40 C to 50 C –(2 C) degrees

Relative Humidity:	Range:	25% RH to 95% RH
	Accuracy:	+/- 5 RH - 40% RH to 80% RH
		+/- 7 RH – below 40% RH / above 80% RH
		40% RH / above 80% RH

AC Voltage:	Range:	2.0 V to 750 V
(true rms)	Accuracy:	+/- 1.2% of rdg. +3 dgts

Size:		Model MMB 12” L x 8.5” W x 1.75” D
		Model TEB 7.1”L x 6.7” W x 2.5” D